DENSO Cables & Stuff.

Motor & Encoder Cables

Optional Controller Boards:

Where can you use them?

The DENSO Range of cables and Boards ensure that the right cable and connection is available when you need it. The range of cables (4m, 8m and 12m) allows access where it is needed when it is needed most! IP40 and IP60, high strength, motor and encoder cables either with or without an L connector for close housing such as in pharmaceutical applications.

The range of DENSO Controller Boards - DeviceNet (Slave, Master, Master & Slave), Parallel I/O (NPN & PNP), CC-Link, Conveyor Tracking, PROFIBUS-DP Slave, S-LINK V Master and RS-232C Extension Board provide a means of meeting customer requirements without compromise!

Reduce wiring and setup time by selecting DeviceNet, Profibus, CC link and USB options. These boards are easy to setup and maintain.

The conveyor tracking board enables synchronous robot movement with a conveyor. Objects can be picked or placed without indexing.

You can see other applications in here

Right click below and select "play" to show video of the Cables in an application

Downloads

By registering with the AA Robotics, you will be able to down load 3D CAD "step" files of the robot models. Also our simulation packages in the software section will enable you to check for cycle time as well as robot reach.

You can down load the basic robot 2D data from here, or a PDF of the robot and control system descriptions or the sales brochure for the HS range of robots.