Home Robot Accessories DENSO Teach Pendant

Purchase

Show Cart
Your Cart is currently empty.
DENSO Teach Pendant PDF Print E-mail
DENSO Tech Pendant

DENSO Teach Pendant.


DENSO Teach Pendant  
OPTIONS
Pendant: Teach Pendant or Mini Pendant
Protection: IP65
Certification: ISO / ANSI / CE / UL

Controller Description

The DENSO TP-RC7M-1 full colour touch screen Teach Pendant. Dust and water resistant the large 7.5 inch colour touch screen pendant incorporates jog dial and customisable screen.

 

TEACH PENDANT CHARACTERISTICS
Size: 198mm x 290mm x 104mm
Weight: 1.3kg
Power Source: 24VDC (supplied from robot controller)
Display: 7.5 inch Liquid crystal display with backlight and touch panel function
LED: 3 LEDs. (POWER, MOTOR, LOCK)
Deadman Switch: 3-position type (OFF-ON-OFF) 2 circuit output
Emergency Stop Button: Four B contacts, 4 circuit outputs (forced disjunction type)
Mode Selector Switch: 3 position (AUTO, MANUAL, TEACHCHECK) keylock switch
Environmental Conditions: Temperature 0° to 40°C Relative humidity 90% or less (no condensation)
Cables:

4m, 8m or 12m

Teach Pendant Features

One Concept Design: Mini Pendant, Teaching Pendant and WINCAPS III have the same lay-out concept

Programming: the Teaching Pendant has full on-line program writing & editing capabilities.

User friendliness: The Teaching pendant has full color touching-screen display with clear error displaying

Customizable: The display of the Teaching Pendant is customiseable up to the requirements of the user.

Protection Class: IP65 (Dust & Mistproof)

   

Where can you use it?

The DENSO TP-RC7M-1 full colour touch screen Teach Pendant. Dust and water resistant the large 7.5 inch colour touch screen pendant incorporates jog dial and customisable screen. The range of cables (4m, 8m and 12m) alows access where it is needed when it is needed most!

With deadman switch, e-stp button and LED's which show the status of the Power Motors and Lock the easy to use jog gets you where you need to be fast - you are in control!

Do not drop the teaching pendant and do not impact against the teaching pendant.

Touch the teaching pendant with your fingers only, never with the tip of a pen or any pointed object. Otherwise, the LCD may be broken.

 

You can see other applications in here


Right click below and select "play" to show video of the TP-RC7M-1 Teach Pendant in an application
 

Downloads

By registering with the AA Robotics, you will be able to down load 3D CAD "step" files of the robot models. Also our simulation packages in the software section will enable you to check for cycle time as well as robot reach.

You can down load the basic robot 2D data from here, or a PDF of the robot and control system descriptions or the sales brochure for the HS range of robots.

ROBOT ARM & CONTROL SYSTEM DOWNLOADS
Specification Brouchure pdf  Specification Brouchure.pdf (598KB)
Teach pendant  pdf  DXF rc7j_tp.zip
Mini Pendant pdf  DXF rc7j_mp.zip