 |
DENSO Mini Pendant.
|
|
|
| OPTIONS: |
| Pendant : |
Teach Pendant or Mini Pendant |
| Protection : |
IP65 |
| Certification : |
ISO / ANSI / CE / UL
|
|
Controller Description
The DENSO MP7ME3P*K Mini Pendant. Dust and water resistant the pendant incorporates a deadman switch, mode selector switch and emergency stop button together with 33 membrane switches.
|
| TEACH PENDANT CHARACTERISTICS |
| Size : |
102mm x 242mm x 75mm |
| Weight : |
0.3kg |
| Power Source : |
24VDC (supplied from robot controller) |
| Display : |
Liquid crystal display, 128 x 64 pixels |
| LED : |
3 LEDs. (POWER, MOTOR, SHIFT) |
| Deadman Switch : |
3 position (AUTO, MANUAL, TEACHCHECK) with keylock |
| Emergency Stop Button : |
Four B contacts, 4 circuit outputs (forced disjunction type) |
| Mode Selector Switch : |
3 position (AUTO, MANUAL, TEACHCHECK) keylock switch |
| Environmental Conditions : |
Temperature 0° to 40°C Relative humidity 90% or less (no condensation) |
| Cables : |
4m, 8m or 12m (cable weight approx. 0.2kg (4 m), 0.4kg (8 m), 0.6kg (12 m))
|
| Software : |
WINCAPS III Light |
|
Teach Pendant Features
One Concept Design: Mini Pendant, Teaching Pendant and WINCAPS III have the same lay-out concept
Programming: the Teaching Pendant has full on-line program writing & editing capabilities.
User friendliness: The Teaching pendant has full color touching-screen display with clear error displaying
Customizable: The display of the Teaching Pendant is customiseable up to the requirements of the user.
Protection Class: IP65 (Dust & Mistproof)
|
|
|
Where can you use it?
The DENSO MP7ME3P*K Mini Pendant. Dust and water resistant witha range of cables (4m, 8m and 12m) alows access where it is needed when it is needed most!
With deadman switch, e-stop button and LED's which show the status of the Power Motors and Shift you are in control!
Do not drop the mini pendant and do not impact against the mini pendant.
You can see other applications in here
|
|
Right click below and select "play" to show video of the MP7ME3P*K Mini Pendant in an application
|
| |
|
Downloads
By registering with the AA Robotics, you will be able to down load 3D CAD "step" files of the robot models. Also our simulation packages in the software section will enable you to check for cycle time as well as robot reach.
You can down load the basic robot 2D data from here, or a PDF of the robot and control system descriptions or the sales brochure for the HS range of robots.
|
|
|
|
Robot Accessories 
