Home Get the latest news by email Previous Emails Movin Cool 15-06-09

Purchase

Show Cart
Your Cart is currently empty.
Movin Cool 15-06-09 Print E-mail

Email Template


 

 

 

 

Eliminate Hot Spots with MOVINCOOL® from AA Robotics

 

Keep your machines and operators COOL this summer

 



 

Dear Neil,

Whilst air conditioning is comfortable, it can be expensive and in some instances a full installation may not be structurally feasible. However if you do require cooling in specific areas such as operator stations machines, process areas or server racks then the range of MOVINCOOL® portable air conditioning units from AA Robotics can provide the answer.

MOVINCOOL® spot cooling allows you to direct the cool air to where you need it most, providing a cost effective and targeted temperature control solution. Within a few minutes temperatures can be reduced by as much as 16 degrees C. Flexible tubes, up to 30 metres in length, distribute the cool air effectively to the areas or processes which are too warm.

AA Robotics MOVINCOOL® Range

MOVINCOOL® 105FE and 155FE Units

MOVINCOOL® 30HE and 50HE Units

With a range of four different MOVINCOOL® units to choose from there is no reason for your machines, or operators for that matter, to overheat this summer.

 

To find out more or arrange a demonstration call AA Robotics on:-

+44 (0) 1296 314 300 or send an E-Mail to - This e-mail address is being protected from spambots. You need JavaScript enabled to view it '; document.write( '' ); document.write( addy_text43686 ); document.write( '<\/a>' ); //--> This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Neil Billingham
General Manager
AA Robotics

 

Benefits of MOVINCOOL® Spot Cooling

  • No need to invest in a full air conditioning system when only localised cooling is required
  • MOVINCOOL® spot cooling helps to prevent fatigue caused by excessive heat and humidity, improving morale and leading to higher quality and output
  • Suitable as a backup for temperature critical zones. Simply roll in the compact unit to the area which requires cooling
  • MOVINCOOL® mobile units can be used to dramatically reduce the cooling times of thermally sensitive processes
  • Thanks to a sturdy design, the units have an unprecented long lifetime

To find out more about the benefits of MOVINCOOL® Spot Cooling, simply click on the link above to download the brochure (pdf),  or contact AA Robotics by e-mail or telephone

 

 


 

For more information  on all of the products and services available from AA Robotics,

please visit our website at  www.aarobotics.co.uk

 


 

To unsubscribe, reply to this email with the word “unsubscribe" in the subject line.

To unsubscribe please click here

 
Make contact with us

 

ORiN open source communications for robots

XR Gantry Robots

AA Robotics Roadshow

about 3 days ago Low cost communications system between PLC to #DENSO #IndustrialRobot using TCP/IP over ethernet http://t.co/3xOZ2m1o
about 13 days ago 2 #DENSO #Robots and me have spent all day packing whiskey boxes, so now a small dram on Burn's Night http://t.co/oeWNoaqq
about 22 days ago New VS900mm IP67 has been installed in UK loading vertical lathe in a very harsh enviroment http://t.co/WiWLXE5u
12 Nov 2011 #DENSO #Robots at IREX in Toyko. Having a huddle http://t.co/YrpEul1E
25 Oct 2011 Remote access to DENSO #robotics to reduce down time in #manufacturing http://t.co/nqj1SSI0
14 Oct 2011 Not as good as a beer robot but comes pretty close http://t.co/fN68dNHrhttp://t.co/CvS0WxSn
14 Oct 2011 DENSO robot serving Ice cream not as good as beer robot but close http://t.co/zmigTxBq via @youtube
14 Oct 2011 DENSO #robot packs parts into the unknown. A box with compartments which the robot finds by looking at the edges. http://t.co/uEX1LN6x
10 Jun 2011 Richard Hammond and a @DENSO #robot and the NASA space shuttle - http://bbc.in/jMEzfK 34mins into program http://wp.me/p144Vw-4H
12 Apr 2011 b-CAP binary Controller Access Protocol explaination http://wp.me/p144Vw-4E
31 Mar 2011 Just had our first play with the new #DENSO VS robot 11 metres per second http://wp.me/p144Vw-4B
25 Mar 2011 Anybody want a new 6 axis #robot for 3000 euros www.aarobotics.co.uk/index.php/wh...at-new.html http://wp.me/p144Vw-4y
23 Mar 2011 ReProgramming 3 #DENSO #robots installed 3 years ago, customer expanding to larger premisis, good news http://wp.me/p144Vw-4v
16 Mar 2011 Loading brass inserts into plastic moulding, heater is 250 deg C and 10 mm away from with #DENSO #robot, hope it doe… http://wp.me/p144Vw-4s
5 Mar 2011 @chambaz think the answer is 1/4 hehe
2 Mar 2011 Did of course mean 12th april 8:30
2 Mar 2011 12th March 20:30 looks like the date for the VS robot to appear on engineering connections with #HammyHammond
24 Feb 2011 Congratulations @bellandbear for winning MKCAMRA Pub of the Year and Pub of the Season.
11 Feb 2011 Getting a #DENSO #Robot to ice a cake. The results could be messy, but tasty http://wp.me/p144Vw-4k
15 Dec 2010 Robot training at Durham Uni: http://wp.me/p144Vw-4e
15 Dec 2010 Fast flexible screwing with a DENSO Robot arm and Visumatic screw driver.: http://wp.me/p144Vw-49
7 Dec 2010 Facebook User group for DENSO Robots : http://t.co/J9aTOQ6 #DENSO #Robot #Industrial Robots
7 Dec 2010 Industrial robot with hand and fingers: http://wp.me/p144Vw-44
6 Dec 2010 Just installed the new DENSO robot tool changer.: http://wp.me/p144Vw-3W
6 Dec 2010 Tool changer in action: http://wp.me/p144Vw-3Z