|
 |
DENSO Petite Sized 5 Axis Assembly Robot 3kg Payload, 430mm Reach.
|
 |
|
|
| OPTIONS |
| Reach: |
430mm |
| Arm Protection: |
IP30 |
| Certification: |
CE
|
|
Arm Description
The VP-Series of DENSO robots combine high speed and repeatability with powerful load-handling capability. The VP-5243 has a 3 kg maximum payload capacity and a maximum allowable moment of inertia (0.040 kgm² at J5, and 0.010 kgm² at J6). In addition, the VP-Series footprint is only 160 x 160 mm, making integration into a machine very easy. The VP-Series is ANSI and CE compliant, making it suitable for European deployment. The VP-5243 robot combines high speed and repeatability with powerful load-handling capability. The VP-5243 robot has a position repeatability of ±0.02mm, a mass of only 13kg and with brakes on all axis the VP-5243 can be mounted in unconventional ways.
|
| ROBOT ARM CHARACTERISTICS |
| Reach: |
430mm |
| Payload: |
3kg |
| Cycle time 300mm + 25mm lift pick and place: |
0.99 Sec |
| Repeatability with 1Kg payload: |
± 0.02mm |
| Maximum moment of inertia of payload |
0.04(J5)Kg/m² |
| Arm weight: |
13Kg |
| Foot print: |
160mm x 160 mm |
| Motion angles: |
J1: ±160°, J2: ±120° J3: +136º -126º J5: ±120º, J6: ±360º |
| Composite speed: |
3,900mm/Sec |
| Services in upper arm: |
4 Air + 9 electric |
|
Arm Features
The Robot is CE marked.
The robot has 4 air pipes through to the upper arm and 9 electrical signals.
|
|
|
Where can you use it?
The robot is ideal for mounting inside a machine to do pick and place applications, typically doing this in less than one second. It has a small foot print (160mm x 160mm) so does not use up much space on the machine bed. Its high speed and repeatability makes it the ideal pick and place device.
The RC7 controller could also control your machine, as it has multi tasking software, with force control Device net, Profibus and Ethernet TCP/IP available
The system can also be easily connected to a vision system such as Cognex, to guide the robot to the pick up or place positions. It has conveyor tracking for 2 conveyors so can operate on the move.
Have a look at the machine applications where the VP-5243 has been used. You can see other applications in here
|
|
Downloads
By registering with the AA Robotics, you will be able to down load 3D CAD "step" files of the robot models. Also our simulation packages in the software section will enable you to check for cycle time as well as robot reach.
You can down load the basic robot 2D data from here, or a PDF of the robot and control system descriptions or the sales brochure for the HS range of robots.
|
|
|
|
DENSO Robots 
