Home Applications

Purchase

Show Cart
Your Cart is currently empty.
Robot Applications
LED Placement in pcb Print E-mail
Robot Placement of LED's in Printed Circuit Board.

LED Placement in PCB 

Get the Flash Player to see this player.


A precise solution to placement of LED's into a range of printed circuit boards was demonstrated by AA Robotics. The customer had small batches of similar boards each with different requirements. By using the flexibility inherent with a robot, all requirements for a production solution were met.

Hole diameter 1.00mm. Wire diameter 0.50mm. DENSO Robot repeatability ±0.02mm. Demonstrated cycle time 1.2 seconds.

AA Robotics distributes DENSO robots in the UK and Ireland. Their range is from 3Kg up to 20Kg payload in 4-axis or 6-axis arm configurations with a reach from 400mm to 1300mm. Denso robots have a fast 0.3 seconds pick and place operation which is repeatable to 0.015mm.

 
Terminal Placement in PCB Print E-mail
Robot Placement of Terminals in Printed Circuit Board.

Terminal Placement in PCB 

Get the Flash Player to see this player.


A precise solution to placement of Angled Terminals  into a range of printed circuit boards was demonstrated by AA Robotics.

The DENSO robot based machine has been introduced as a result of increasing product demand.

There is no PLC in the production cell, all the machines functions are coordinated by the multi tasking DENSO robot controller using Devicenet I/O , giving a considerable cost saving. Six background tasks operate to control 128 I/O points and all status and error messages are shown on the robot HMI.

AA Robotics distributes DENSO robots in the UK and Ireland. Their range is from 3Kg up to 20Kg payload in 4-axis or 6-axis arm configurations with a reach from 400mm to 1300mm. Denso robots have a fast 0.3 seconds pick and place operation which is repeatable to 0.015mm.

 
Grinding Drill Bits Print E-mail
Grinding Drill Bits

Grinding Driil Bits 

Get the Flash Player to see this player.


A precise solution to the placement of drill bits for grinding faces using a DENSO HS-4555 Robot was demonstrated by AA Robotics.

The DENSO robot based machine has been introduced as a result of increasing product demand.

There is no PLC in the production cell, all the machines functions are coordinated by the multi tasking DENSO robot controller using Devicenet I/O , giving a considerable cost saving. Six background tasks operate to control 128 I/O points and all status and error messages are shown on the robot HMI.

AA Robotics distributes DENSO robots in the UK and Ireland. Their range is from 3Kg up to 20Kg payload in 4-axis or 6-axis arm configurations with a reach from 400mm to 1300mm. Denso robots have a fast 0.3 seconds pick and place operation which is repeatable to 0.015mm.

 
Application Evaluation Print E-mail

Not sure if a robot can do it?

We can look at your application in order to select a robot for the task.

Pre-Order Stage

Using the robot simulation package we can determine the reach and weight requirements for the application, suggest a gripper orientation and position the robot relative to the work position.

Once the robot type has been established we can predict the cycle time you would expect, thus giving you the confidence in putting forward the quotation.

We can also produce a video in avi format which you can use as part of your sales presentation to your end customer.

Previous Examples

Have a look at our examples of previous evaluations.

  • Software Simulation
  •  


    Make contact with us

     

    ORiN open source communications for robots

    XR Gantry Robots

    AA Robotics Roadshow

    about 2 days ago Low cost communications system between PLC to #DENSO #IndustrialRobot using TCP/IP over ethernet http://t.co/3xOZ2m1o
    about 11 days ago 2 #DENSO #Robots and me have spent all day packing whiskey boxes, so now a small dram on Burn's Night http://t.co/oeWNoaqq
    about 21 days ago New VS900mm IP67 has been installed in UK loading vertical lathe in a very harsh enviroment http://t.co/WiWLXE5u
    12 Nov 2011 #DENSO #Robots at IREX in Toyko. Having a huddle http://t.co/YrpEul1E
    25 Oct 2011 Remote access to DENSO #robotics to reduce down time in #manufacturing http://t.co/nqj1SSI0
    14 Oct 2011 Not as good as a beer robot but comes pretty close http://t.co/fN68dNHrhttp://t.co/CvS0WxSn
    14 Oct 2011 DENSO robot serving Ice cream not as good as beer robot but close http://t.co/zmigTxBq via @youtube
    14 Oct 2011 DENSO #robot packs parts into the unknown. A box with compartments which the robot finds by looking at the edges. http://t.co/uEX1LN6x
    10 Jun 2011 Richard Hammond and a @DENSO #robot and the NASA space shuttle - http://bbc.in/jMEzfK 34mins into program http://wp.me/p144Vw-4H
    12 Apr 2011 b-CAP binary Controller Access Protocol explaination http://wp.me/p144Vw-4E
    31 Mar 2011 Just had our first play with the new #DENSO VS robot 11 metres per second http://wp.me/p144Vw-4B
    25 Mar 2011 Anybody want a new 6 axis #robot for 3000 euros www.aarobotics.co.uk/index.php/wh...at-new.html http://wp.me/p144Vw-4y
    23 Mar 2011 ReProgramming 3 #DENSO #robots installed 3 years ago, customer expanding to larger premisis, good news http://wp.me/p144Vw-4v
    16 Mar 2011 Loading brass inserts into plastic moulding, heater is 250 deg C and 10 mm away from with #DENSO #robot, hope it doe… http://wp.me/p144Vw-4s
    5 Mar 2011 @chambaz think the answer is 1/4 hehe
    2 Mar 2011 Did of course mean 12th april 8:30
    2 Mar 2011 12th March 20:30 looks like the date for the VS robot to appear on engineering connections with #HammyHammond
    24 Feb 2011 Congratulations @bellandbear for winning MKCAMRA Pub of the Year and Pub of the Season.
    11 Feb 2011 Getting a #DENSO #Robot to ice a cake. The results could be messy, but tasty http://wp.me/p144Vw-4k
    15 Dec 2010 Robot training at Durham Uni: http://wp.me/p144Vw-4e
    15 Dec 2010 Fast flexible screwing with a DENSO Robot arm and Visumatic screw driver.: http://wp.me/p144Vw-49
    7 Dec 2010 Facebook User group for DENSO Robots : http://t.co/J9aTOQ6 #DENSO #Robot #Industrial Robots
    7 Dec 2010 Industrial robot with hand and fingers: http://wp.me/p144Vw-44
    6 Dec 2010 Just installed the new DENSO robot tool changer.: http://wp.me/p144Vw-3W
    6 Dec 2010 Tool changer in action: http://wp.me/p144Vw-3Z